QCSB will be shutting down soon. More details here

drill press?

Mechanical questions, help, and tutorials.
Post Reply
offline
User avatar
Mikeurtno
Posts: 265
Joined: Jul 2014
Bike: 2008 Ninja 250 (track) 2009 Yamaha fz6 (street)
Location: Davenport

drill press?

Postby Mikeurtno » Thu Apr 23, 2015 9:34 pm

Does anyone have a drill press and would be willing to help me bore out some bushings on a gsxr rear shock? :bowdown:
Top
offline
User avatar
shagzomatic
Posts: 2262
Joined: Feb 2010
Bike: 2005 FZ6, 2006 SV650, 2007 R1
Location: Davenport, IA
Contact:
Contact shagzomatic

Re: drill press?

Postby shagzomatic » Thu Apr 23, 2015 10:33 pm

Drill press, yes. Drill press vise (which you'll probably want for this), no.
With enough profanity, you can accomplish anything.

CCS/ASRA #380
Pirate Dog Motosport: www | fb | insta
Top
offline
User avatar
Mikeurtno
Posts: 265
Joined: Jul 2014
Bike: 2008 Ninja 250 (track) 2009 Yamaha fz6 (street)
Location: Davenport

Re: drill press?

Postby Mikeurtno » Thu Apr 23, 2015 10:42 pm

Quick Google search shows that homedepot might have something that would work for pretty cheap. I will buy the vise if you are willing to help. :)
Top
offline
User avatar
Andyman
Posts: 437
Joined: Mar 2010
Bike: 2015 Harley Street Glide

Re: drill press?

Postby Andyman » Fri Apr 24, 2015 9:21 am

I have a drill press with a vice. How big of a bore and where is the hole located?
Top
offline
User avatar
shagzomatic
Posts: 2262
Joined: Feb 2010
Bike: 2005 FZ6, 2006 SV650, 2007 R1
Location: Davenport, IA
Contact:
Contact shagzomatic

Re: drill press?

Postby shagzomatic » Fri Apr 24, 2015 2:06 pm

I could give you a hand, assuming I have a bit the size you're looking to bore.

...and you can probably find a vise for less at Harbor Freight.
With enough profanity, you can accomplish anything.

CCS/ASRA #380
Pirate Dog Motosport: www | fb | insta
Top
Post Reply

Return to “Mechanical / How-to”