$40 motorcycle stand.

Mechanical questions, help, and tutorials.
offline
User avatar
Caz
Posts: 142
Joined: Apr 2011
Bike: 1987 honda spree (iowa edition)
Contact:

$40 motorcycle stand.

Postby Caz » Fri Jan 25, 2013 5:41 am

Hey guys haven't been on here in a bit but built this stand this past weekend and thought I would share it. I paid about 40 for the plywood and a little over an hour putting it together. It holds the bike and me standing next to it with no problems doesn't wabble at all. Its held together with friction doesn't use any screws to hold it together its a cheap alt that works prety well.
Attachments
2013-01-25 05.39.56.png
"Carry the front wheel half a centimeter in the air all the way up the hill at 150mph put it down just over the rise, it's just a timing issue." Colin Edwards, "The Doctor, the tornado and the Kentucky Kid"

offline
User avatar
Caz
Posts: 142
Joined: Apr 2011
Bike: 1987 honda spree (iowa edition)
Contact:

Postby Caz » Fri Jan 25, 2013 5:42 am

http://www.bbcracing.com/old/box/

The link to the plans.
"Carry the front wheel half a centimeter in the air all the way up the hill at 150mph put it down just over the rise, it's just a timing issue." Colin Edwards, "The Doctor, the tornado and the Kentucky Kid"